home *** CD-ROM | disk | FTP | other *** search
/ NOVA - For the NeXT Workstation / NOVA - For the NeXT Workstation.iso / Documents / NeXTAnswers / hardware.213 < prev    next >
Text File  |  1992-02-06  |  925b  |  20 lines

  1. {\rtf0\ansi{\fonttbl\f2\fnil Times-Roman;\f1\fswiss Helvetica;}
  2. \paperw11440
  3. \paperh7540
  4. \margl120
  5. \margr120
  6. \pard\tx960\tx1920\tx2880\tx3840\tx4800\tx5760\tx6720\tx7680\tx8640\tx9600\f2\b0\i0\ul0\fs28 cable optical connector od hardware\
  7. \
  8. Q:  Which optical drive is device 0 and which is device 1?\
  9. \
  10. Q:  I just installed an internal optical disk drive but I cannot boot from it.\
  11. \
  12. A:  The cable that goes from the board to the drive has two connectors that can be plugged to the drive.  The one in the middle of the cable will select the drive as #0, and the one on the end will select it as #1.  At present, drive #1 is not used.  Always connect the optical drive to the connector in the middle of the cable (device 0).  If it's hooked it up wrong, you'll have problems trying to use the drive.  (Note to authorized service centers: also, the dvt diagnostic test will fail.)\
  13. \
  14. QA213\
  15. \
  16. Valid for 1.0\
  17. Valid for 2.0\
  18. \
  19.  
  20.